Viavi SmartOTDR 100, User Manual, Page: 137 / 156

Chapter 11 Maintenance and Troubleshooting
Maintenance procedure
User Manual 7SMART102 Rev002 119
Installation from
another server
Before starting the software upgrade via Ethernet, make sure the IP
address of the PC server.
The update can be performed directly onto the equipment, using an http
address.
1 Connect the SmartOTDR to a PC via an Ethernet link.
2 On the Home page, press Connectivity > Ethernet icons.
3 On the line Ethernet , select Mode : Dynamic .
4 Press Exit to return to Connectivity page
5 Press Upgrade icon
6 In the Upgrade Server box:
– On the line Address Type , select Server Name or IP Address .
– Enter the Server Name (if Server Name has been previously
selected) or the Server Address (if IP Address has been previ-
ously selected)
7 Press Exit to return to Connectivity page
8 Press Ethernet icon
9 On the line Use proxy , select No , Manual or Auto wether a proxy is
used or not.
10 Press Exit twice to return to Home page.
11 Press Settings icon .
12 Press, in succession, Expert Tools > Upgrades > Software
Upgrade > Upgrade via Ethernet
.
The message
Verify IP address of PC server
appears.
Fig. 83 List of software versions (current and new)
Software versions
installed on Platform
Software versions
available on selected
media for update