Viavi SmartClass ORL-85 Operating Manual Download Page 56

Page: 56 / 95

ORL-85/ORL-85P

9 M

EASURING

OSS

WITH

OURCE

OWERMETER

ENERAL

INFORMATION

EASURING

OSS

WITH

OURCE

OWERMETER

General information

The ORL-85 offers three different measurement modes.
•

Source Mode:

The instrument works as a laser source.

•

Powermeter Mode:

The instrument works as an optical power

meter.

Instead of using the

Loss

test mode which restricts the

measurement to a fiber loop, two ORL-85/ORL-85P instruments

can be used for remote operation. In this

Source/Powermeter

Mode

one instrument (like another ORL-85 or the OLS-85)

works as a laser source, while the other ORL-85/ORL-85P works

as an optical power meter. Source and powermeter are not

locked in this mode.

For information on measurement adjustements on your

powermeter device see “Powermeter Operation” on page 43.

Performing the measurement

Select the Source application on your source device and the

Powermeter application on your powermeter device.

Perform the Referencing on the powermeter device:
a) Decide for one of the Reference methods

(see “Appendix - Referencing Methods” on page 78).

b) Connect both devices accordingly.
c) Switch on the laser on your source device.
d) Press the

[

]

key and tap the

[

Store ABS->REF

]

button.

Switch the laser source off.

Connect your fiber system under test as shown in figure [...].

Switch on the laser on your source device.

The loss is displayed on the powermeter device.

Summary of Contents for SmartClass ORL-85
































































































Search results

Summary of Contents for SmartClass ORL-85

Reviews:

Related manuals for SmartClass ORL-85

Brands by name

Popular brands

Viavi SmartClass ORL-85, Operating Manual

Search results

Summary of Contents for SmartClass ORL-85

Reviews:

Related manuals for SmartClass ORL-85

Brands by name

Popular brands