Viavi SmartClass ORL-85 Operating Manual Download Page 18

Page: 18 / 95

ORL-85/ORL-85P

3 G

ETTING

TARTED

NPACKING

THE

INSTRUMENT

The battery compartment is on the back of the instrument.

Press down the latch to release and to open the lid of the

battery compartment.

Insert new batteries in the tray or remove the used batteries

from the tray and replace all eight with fresh ones.

NOTE:

Take care to insert the batteries correctly. The correct polarity is

indicated by a diagram inside the battery compartment.

– or –

Insert new or replace the RBP2 Li-Ion Battery Pack.

– or –

Switch from non-rechargeable batteries to rechargeable ones

by replacing the battery tray with a new battery pack (or vice

versa).

Close the battery compartment.

Press the

[

]

key to switch on.

Recharging the batteries

The rechargeable RBP2 Li-Ion Battery Pack is recharged when

the PS4 Universal AC/DC Power Supply is being used to power

the instrument. The instrument switches to trickle charging

automatically as soon as the RBP2 Li-Ion Battery Pack is fully

charged.

NOTE:

Rechargeable AA batteries will not be recharged in the

instrument. For AA-type rechargeable batteries please use an

external charger.

It is not possible to charge the rechargeable AA batteries or the

RBP2 Li-Ion Battery Pack via the USB interface.
The instrument is powered by the PS4 Universal AC/DC Power

Supply if the PS4 Universal AC/DC Power Supply and the USB

interface are both connected.

Summary of Contents for SmartClass ORL-85
































































































Search results

Summary of Contents for SmartClass ORL-85

Reviews:

Related manuals for SmartClass ORL-85

Brands by name

Popular brands

Viavi SmartClass ORL-85, Operating Manual

Search results

Summary of Contents for SmartClass ORL-85

Reviews:

Related manuals for SmartClass ORL-85

Brands by name

Popular brands