42
OLP-85/OLP-85P
6 P
OWERMETER
O
PERATION
S
ELECTING
AND
CHANGING
THE
POWER
DISPLAY
MODE
Selecting and changing the power display
mode
The OLP-85/OLP-85P provides following display modes:
• absolute power level in dBm or Watt
• power level in dB relatively to a reference value
• Pass/Fail indication based on a limit
1.
To toggle between the display modes, tap the power level in
the measurement display.
– or –
2.
Press the
[
A
]
key and tap the
[
dBm/Watt
]
button to toggle
between both options.
– or –
Tap the
[
dB
]
button.
– or –
Tap the
[
Pass/Fail
]
button.
Displaying relative power level
The actual measured power level relative to a reference value is
displayed in relative power display mode. The reference value
can be set by defining the actual power level as the reference
value or can be edited manually.
Summary of Contents for SmartClass OLP-85 Series
Page 82: ...OLP 85 OLP 85P 82 ROHS RoHS ...
Page 83: ...OLP 85 OLP 85P 83 ROHS ...