Viavi Seeker X, User Manual

Page: 48 / 66

Seeker X User’s Guide
22137808, Rev. 001 Feb 2020 48
Chapter 2 Using Your Seeker X
Saving measurement snapshots
While testing for leaks, you may need to record the pre-fix and post-fix leakage information
recorded by the Seeker X.
Pre-fix snapshot
SEEKER X
μV
m
dB
NOISE
FREQ PK DIST GPS
Post-fix snapshot
SEEKER X
μV
m
dB
NOISE
FREQ PK DIST GPS
Pre-Fix
To record the pre-fix leakage information recorded by the Seeker,
press the SNAPSHOT button when this screen is displayed.
Post-Fix
To record the post-fix leakage information recorded by the Seeker,
press the SNAPSHOT button when this screen is displayed.
Use the SNAPSHOT button to
display the Snapshot mode. The
Snapshot modes will appear in
the same order in which they are
discussed in this section.