Viavi Seeker X, User Manual

Page: 37 / 66

Seeker X User’s Guide
22137808, Rev. 001 Feb 2020 37
Chapter 2 Using Your Seeker X
Using the display
Your Seeker X will operate differently, depending on whether it is in the Mobile Mount or if
you are using it outside the vehicle in walkout mode.
In the Mobile Mount
In the Mobile Mount, the Seeker X automatically scans all of
the frequencies in the selected frequency plan, if available, and
shows up to two of the plan’s leakage values on the screen
simultaneously.
y
To show the current frequency setting, press the
CHANGE button.
y
To toggle through the frequencies, press the CHANGE
button multiple times.
The leakage values for each frequency are then displayed in the
corresponding area of the screen.
If leaks are detected in alternate frequencies, a tone will sound
to alert you, but the level won’t be shown.
Outside the Mobile Mount
When removed from the Mobile Mount, the Seeker X no longer
automatically scans through the frequency plan (and only
displays one frequency at a time, as shown here).
y
To show the current frequency setting, press the CHANGE
button. The type of antenna you need to attach is then
displayed.
y
To toggle through the frequencies, press the CHANGE button multiple times.
The leakage values for each frequency are then displayed.
Current frequencies
SEEKER X
μV
m
dB
NOISE
FREQ PK DIST GPS
Current frequency
SEEKER X
μV
m
dB
NOISE
FREQ PK DIST GPS
SEEKER X
μV
m
dB
NOISE
FREQ PK DIST GPS
Current leak values
Attach WFS-1 antenna for
130–450 MHz
SEEKER X
μV
m
dB
NOISE
FREQ PK DIST GPS
Current leak value