Viavi ONX-220 User Manual Download Page 59

Page: 59 / 212

ONX-220 User's Guide

22135173, Rev. 000

June 2020

Chapter

2 Utilities

Viewing your work orders

The

WorkFlow Manager

allows you to see all your

current work orders.
Tests specified within the work orders can be

launched from here. Select a work order to view it,

and then choose the test to run it.
From the System main menu, select

Workflow

Manager

. You can also bring up Workflow Manager

from the Tray menu.

With the workflow option in StrataSync, each tech’s meter

can be updated with a day’s workorders, enabling a tech to

choose the workorder that matches the current task, perform

the prescribed tests, and close it out with data uploaded

for management—with a smooth, simple process. Get

confirmation that techs and contractors have performed the

work with geo-tagged test reports uploaded via the Mobile

Tech App.

Summary of Contents for ONX-220





















































































































































































































Search results

Summary of Contents for ONX-220

Reviews:

Related manuals for ONX-220

Brands by name

Popular brands

Viavi ONX-220, User Manual

Search results

Summary of Contents for ONX-220

Reviews:

Related manuals for ONX-220

Brands by name

Popular brands