Viavi ONX-220, User Manual

Page: 57 / 212

ONX-220 User's Guide
22135173, Rev. 000 June 2020 57
Chapter 2 Utilities
NOTE:
If an Option Code was entered as a part of synchronization,
power must be cycled to the unit to complete the process and
initialize the option.
NOTE:
You must be running an active test or the Save Reports icon
will be disabled (gray).
y
Copy (“clone”) the configuration settings for the base unit, as well as any
company-specific configurations such as custom filters, web bookmarks, and
FTP passwords. This can be used to create a “golden” unit.
y
Lastly, if any upgrades are available, the user will be informed of their
availability and asked to verify their desire to receive the upgrade.
When synchronization is complete, the Status will indicate “Sync Complete”. The unit may
be disconnected from the server.
Generating reports
The Save Report icon (provided on the Tray menu) allows you to create reports based on
the configuration settings and test results for the currently active test. This only works for
Ethernet tests.
Saving a report
If you are currently running a test, you can save test results, configuration settings, and
graphs as a report.
1. If you haven’t already done so, access the Tray menu and then press
Save
Report . A Save Report screen appears.
2. Enter the name of the report. The default file name uses the type of test
followed by a three-digit number that increments with each file saved (for
example, cablecheck001).
3. Specify the format (PDF, XML, or HTML).
4. If you want to include custom fields in the report, enable, then specify values for
the fields.