manualshive.com logo in svg

Viavi ONX-220, User Manual

The Viavi ONX-220 user manual is a comprehensive guide for effortlessly setting up and utilizing this incredible product. Packed with valuable instructions and troubleshooting tips, it is available for free download on our website. Unlock the full potential of your Viavi ONX-220 with this essential manual.

Share
Download
background image

ONX-220 User's Guide

22135173, Rev. 000

June 2020

195

Chapter 

11  Test Results

Spectrum results

The Spectrum results display screen contains controls for 

changing the frequency spectrum display from the selected 

demarcation point, change RBW and AGC settings and 

stopping the test.
The onscreen markers specifying the point or interval to be 

measured can also be adjusted.

Moving the markers

To move the on-screen markers, simply drag or use the 

directional arrow buttons.

Adding a second marker

To add a second marker for delta measurements, just 

double tap the screen and it will appear. Drag to the 

desired location and the displayed measurements will 

automatically update to delta intervals.

Changing the Display

Select the 

Display

 button to rotate to landscape or 

portrait view, change division size, change span or toggle Live/Max and Min traces.

Changing RBW and AGC

Select the 

Settings

 button to change the RBW or AGC settings.

Stopping the test

Select the 

Stop

 button to prevent the meter from taking any more readings and updating 

the results.

Summary of Contents for ONX-220





















































































































































































































Reviews:

No comments

Related manuals for ONX-220

3nh HG Series Operation Manual preview
HG Series
Brand: 3nh Pages: 10
Waltron 9065 Quick Reference Manual preview
9065
Brand: Waltron Pages: 11
Labom BE Series Operating Instructions Manual preview
BE Series
Brand: Labom Pages: 6
Labom BE Series Operating Instructions preview
BE Series
Brand: Labom Pages: 5
LaMotte SMART3 Quick Start Manual preview
SMART3
Brand: LaMotte Pages: 2
Lampa 38862 Manual preview
38862
Brand: Lampa Pages: 12
Schneeberger MINIRAIL Manual preview
MINIRAIL
Brand: Schneeberger Pages: 35
Icon Process Controls Level Pro UltraPro 500 Series Instruction Manual preview
Level Pro UltraPro 500 Series
Brand: Icon Process Controls Pages: 19
Hanna Instruments HI97730 Instruction Manual preview
HI97730
Brand: Hanna Instruments Pages: 28
TAC H2S/H2O/O2 Instruction Manual preview
H2S/H2O/O2
Brand: TAC Pages: 28
Sper scientific 840060 Instruction Manual preview
840060
Brand: Sper scientific Pages: 12
Sherwood Scuba Scuba MAXIMUS SRB3600 regulator Assembly & Maintenance Manual preview
Scuba MAXIMUS SRB3600 regulator
Brand: Sherwood Scuba Pages: 29
Hanna Instruments HI 96762C Instruction Manual preview
HI 96762C
Brand: Hanna Instruments Pages: 28
Baker Hughes Panametrics XDP User Manual preview
Panametrics XDP
Brand: Baker Hughes Pages: 64
IROX PE-DRO Operating Instructions Manual preview
PE-DRO
Brand: IROX Pages: 8
Omega HHM598F Manual preview
HHM598F
Brand: Omega Pages: 13
Fluke 279 FC Calibration Manual preview
279 FC
Brand: Fluke Pages: 22
Teledyne Lecroy WaveRunner 8000-R Getting Started Manual preview
WaveRunner 8000-R
Brand: Teledyne Lecroy Pages: 20

Brands by name

Popular brands

Load more brands