Viavi ONX-220 User Manual Download Page 160

Page: 160 / 212

ONX-220 User's Guide

22135173, Rev. 000

June 2020

160

Chapter

10 Using the OneExpert with a Mobile Device

Updating the firmware from StrataSync

Once you are logged into StrataSync, you can update the firmware of your unit via Ethernet.

1. Connect the OneExpert to the AC charger adapter to ensure an uninterrupted supply

of power during the update.

2. Connect the OneExpert to your network via wired

Ethernet.

3. Go back to the Main screen and select the

Options

menu in the upper right. The Options menu appears.

4. Select

Upgrade Firmware

. The Upgrade Firmware

screen appears, showing the current firmware version

and if an update is available.
You can also get to the Upgrade Firmware screen from

the Main menu and selecting

Show More

5. If an update is available, select

Start Upgrade

update the unit.

The update will begin and the meter will power off when

finished. Please wait as this could take 10-15 minutes, based on

the size of the update file and connection speed.

Options menu

NOTE:
You need the appropriate permissions in StrataSync to

update the firmware.

Summary of Contents for ONX-220





















































































































































































































Search results

Summary of Contents for ONX-220

Reviews:

Related manuals for ONX-220

Brands by name

Popular brands

Viavi ONX-220, User Manual

Search results

Summary of Contents for ONX-220

Reviews:

Related manuals for ONX-220

Brands by name

Popular brands