Viavi ONX-220 User Manual Download Page 151

Page: 151 / 212

ONX-220 User's Guide

22135173, Rev. 000

June 2020

151

Chapter

9 Configuring the OneExpert with StrataSync

Throughput URL Settings

The Throughput URL Settings include the following fields:

Display throughput URLs to the technican and in reports

Label and downstream throughput URL

Label and upstream throughput URL

To add or delete throughput URLs from the list, use the green (+) or red (-) buttons.

Viewing, Editing, Renaming, or Deleting Throughput URL Settings

1. Check the box in front of the desired Throughput URL

Settings.

2. Select the

Action

button above the left side of the list

pane. The Actions dropdown appears.

3. Select

View, Edit, Rename,

Delete

from the

dropdown list and change or confirm from the

following screen.

Saving Throughput URL Settings

When all values have been entered, select

Save

Summary of Contents for ONX-220





















































































































































































































Search results

Summary of Contents for ONX-220

Reviews:

Related manuals for ONX-220

Brands by name

Popular brands

Viavi ONX-220, User Manual

Search results

Summary of Contents for ONX-220

Reviews:

Related manuals for ONX-220

Brands by name

Popular brands