Viavi ONX-220 User Manual Download Page 148

Page: 148 / 212

ONX-220 User's Guide

22135173, Rev. 000

June 2020

148

Chapter

9 Configuring the OneExpert with StrataSync

Channel Plan Template Settings

The Channel Plan Template settings include the following fields:

Channel number

Channel center frequency

Channel name

To add or delete exclusion zones from the list, use the green (+) or red (-) buttons.

Viewing, Editing, Renaming, or Deleting a Channel Plan Template

1. Check the box in front of the desired Channel Plan

Template.

2. Select the

Action

button above the left side of the list

pane. The Actions dropdown appears.

3. Select

View, Edit, Rename,

Delete

from the

dropdown list and change or confirm from the

following screen.

Saving Channel Plan Templates

When all values have been entered, select

Save

Summary of Contents for ONX-220





















































































































































































































Search results

Summary of Contents for ONX-220

Reviews:

Related manuals for ONX-220

Brands by name

Popular brands

Viavi ONX-220, User Manual

Search results

Summary of Contents for ONX-220

Reviews:

Related manuals for ONX-220

Brands by name

Popular brands