Viavi ONX-220 User Manual Download Page 133

Page: 133 / 212

ONX-220 User's Guide

22135173, Rev. 000

June 2020

133

Chapter

9 Configuring the OneExpert with StrataSync

Limit Plan Exclusion Zone Configuration

Each limit plan exclusion zone includes the following fields:

Start frequency

Stop frequency

Remove channels from channel plan

To add or delete exclusion zones from the list, use the green (+) or red (-) buttons.

Viewing, Editing, Renaming, or Deleting a Limit Plan Exclusion Zone

1. Check the box in front of the desired Limit Plan

Exclusion Zone.

2. Select the

Action

button above the left side of the list

pane. The Actions dropdown appears.

3. Select

View, Edit, Rename,

Delete

from the

dropdown list and change or confirm from the

following screen.

Saving Limit Plan Exclusion Zones

When all values have been entered, select

Save

Summary of Contents for ONX-220





















































































































































































































Search results

Summary of Contents for ONX-220

Reviews:

Related manuals for ONX-220

Brands by name

Popular brands

Viavi ONX-220, User Manual

Search results

Summary of Contents for ONX-220

Reviews:

Related manuals for ONX-220

Brands by name

Popular brands