manualshive.com logo in svg

Viavi ONX-220, User Manual

The Viavi ONX-220 user manual is a comprehensive guide for effortlessly setting up and utilizing this incredible product. Packed with valuable instructions and troubleshooting tips, it is available for free download on our website. Unlock the full potential of your Viavi ONX-220 with this essential manual.

Share
Download
background image

ONX-220 User's Guide

22135173, Rev. 000

June 2020

128

Chapter 

9  Configuring the OneExpert with StrataSync

Measurement Settings

Measurement settings are used to determine if a DOCSIS test (range and registration) is 

performed and if DOCSIS service tests (throughput and packet loss) are performed when a 

OneCheck test is run. Application of the measurement settings are made to all locations: tap, 

ground block, and CPE.

Measurement Settings Configuration

You can find Measurement Settings through the 

Global Archives

 pane on the left side of the 

StrataSync Template screen.

New Measurement Settings

1.  From the Measurement Settings 

Plans screen, select the 

New 

Measurement Settings

 button 

in the upper right corner of the 

screen. The Create Measurement 

Setting screen appears.

2.  Enter the desired name and 

optional description.

3.  When the desired data has been entered, select the 

Create

 button.

Measurement Settings

New Measurement Settings

Summary of Contents for ONX-220





















































































































































































































Reviews:

No comments

Related manuals for ONX-220

Kawai MP4 Service Manual preview
MP4
Brand: Kawai Pages: 33
Kawai MP4 Owner'S Manual preview
MP4
Brand: Kawai Pages: 60
Larson Davis 820 Technical Reference Manual preview
820
Brand: Larson Davis Pages: 193
Facom 712B Instruction Manual preview
712B
Brand: Facom Pages: 116
E+E Elektronik OMNIPORT 30 Operating Manual preview
OMNIPORT 30
Brand: E+E Elektronik Pages: 40
Halcyon TRAVELER Owner'S Manual preview
TRAVELER
Brand: Halcyon Pages: 36
Oakton 150 Series Operating Instructions preview
150 Series
Brand: Oakton Pages: 4
LaserLiner PowerCross-Laser 8 S Operating Instructions Manual preview
PowerCross-Laser 8 S
Brand: LaserLiner Pages: 64
LaserLiner ClimaHome-Check Plus Manual preview
ClimaHome-Check Plus
Brand: LaserLiner Pages: 10
LaserLiner MeterMaster Plus Quick Start Manual preview
MeterMaster Plus
Brand: LaserLiner Pages: 104
LaserLiner ThermoSpot Operating Instructions Manual preview
ThermoSpot
Brand: LaserLiner Pages: 52
LaserLiner LaserRange-Master T2 Manual preview
LaserRange-Master T2
Brand: LaserLiner Pages: 52
LaserLiner ArcoMaster 40 Quick Start Manual preview
ArcoMaster 40
Brand: LaserLiner Pages: 5
LaserLiner CombiRangeXtender 40 Operating Instructions Manual preview
CombiRangeXtender 40
Brand: LaserLiner Pages: 84
LaserLine SuperCross-Laser 2P Operating Instructions Manual preview
SuperCross-Laser 2P
Brand: LaserLine Pages: 92
LaserLine MoistureFinder Compact Manual preview
MoistureFinder Compact
Brand: LaserLine Pages: 56
LaserLiner LaserRange-Master Gi7 Pro Operating Instructions Manual preview
LaserRange-Master Gi7 Pro
Brand: LaserLiner Pages: 56
Laser Tools 5846 Instructions preview
5846
Brand: Laser Tools Pages: 4

Brands by name

Popular brands

Load more brands