Viavi ONX-220, User Manual

Page: 115 / 212

ONX-220 User's Guide
22135173, Rev. 000 June 2020 115
Chapter 9 Configuring the OneExpert with StrataSync
Upon entering the Template screen, it will be blank.
To display a particular type of template, select one
of the options under Global Archives .
Configuration via StrataSync is available for the
following:
y
Limit plans
y
DOCSIS service plans
y
Off-air ingress plans
y
Measurement settings
y
Limit plan exclusion zones
y
Tilt settings
y
Digital measurement settings
y
Ingress spans
y
Auto purge
y
Channel plan templates
y
Throughput URL settings
Limit Plans
Limit Plans determine when a test result will end up being a Pass or Fail or if any result should
be determined at all for that measurement.
There are currently three locations available for limit settings – Tap, Ground Block, and CPE.
Limit Plan Configuration
Before a limit plan can be deployed, the parameters of the circuit point available for limit
testing must have limit values and conditions applied to them.
You can find Limit Plans through the
Global
Archives pane on the left side of the StrataSync
Manage Templates screen. The Limit Plan
screen appears.
Limit Plan