Viavi OneExpert DSL ONX-580, User Manual

Page: 65 / 282

OneExpert DSL User's Guide
22052280, Rev. 015 April 2019
Chapter 3 Utilities
65
OneCheck Copper/DSL/Fiber/Ethernet Profile Editor
The OneCheck profile editor streamlines all
configuration requirements for Copper, DSL, Fiber,
and Ethernet testing. The home screens for each
of these testing areas are slightly different but the
workflow is shared.
1. Press the OneCheck Editor icon on either
OneCheck DSL, Copper, Fiber, or Ethernet
menus of the Home screen.
2. The OneCheck Editor screen will open, as
shown here (OneCheck Fiber, in this example).
3. To add new profiles, press the New button
and follow the instructions in each particular
case of the DSL, Copper, Fiber, or Ethernet
testing. Refer to the OneCheck section for
each of these tests for more information.
4. To edit the existing profiles that are listed
on the screen (including the new ones you just
created), press the Profile button.
5. In the opened Profile menu, you can set the
following configurations:
• Set Home Screen Label – Sets the name
of the test.
• Set Home Screen Icon – Sets the image
next to the test name. To set it, you need
to have the file named screen001.png on
the USB root directory.
• Set Description – Places a short
description under the test name, shown in
the Editor screen.
• Set Edit Password – Prevents technicians
from inadvertently changing or deleting
the profiles. You can either assign
individual passwords to tests or, to
avoid confusion, use one password for
all of them. Once you set one or several
passwords, you will see little images of
a lock next to the affected tests. If you
need to edit test profiles and passwords, you will have to use the associated
password(s).