Viavi OneExpert DSL ONX-580, User Manual

Page: 157 / 282

OneExpert DSL User's Guide
22052280, Rev. 015 April 2019
Chapter 9 WiFi Testing
157
Changing the power off delay
The power off delay values associated with each registered WiFi Advisor are shown within
the Registered Devices section of the Device Management screen. These values define the
amount of idle time that must transpire before the test device will automatically power
down.
1. From the WiFi Advisor application, access the pull-down tray and select WFED
Management . The Device Management screen appears.
2. Select the WiFi Advisor with the label (or serial number) of the desired device.
3. In the pop-up menu, select
Change Auto-Off Delay .
4. Select the auto-off delay.
Disabled means it will not automatically power down regardless of expired time.
To cancel without changing the setting, press the Back arrow.
Updating the WiFi Advisor firmware
The firmware on the WiFi Advisor can be upgraded over Bluetooth using the OneExpert
DSL. The WiFi Advisor must be paired and registered with the OneExpert first.
1. From the WiFi menu, select WiFi Advisor , access the pull-down tray and select
WFED Management . The Device Management screen appears.
2. Select the WiFi Advisor with the label (or serial number) of the desired device.
3. In the pop-up menu, select
Update Firmware . A confirmation screen appears.
4. Do one of the following:
• If you do not wish to update the device, press the Back arrow.
• Select OK to update the firmware.
5. Select Yes . The update begins. The status bar at the top indicates the update
progress.