46
OLP-88
6 P
ROBE
/PCM O
PERATION
C
ONFIGURING
THE
D
IGITAL
P
ROBE
Profile
1.
Press the
[
A
]
key.
2.
Tap the
[
Profile
]
button.
3.
Tap the Profile which will be used for the test of the fiber
connector:
– E2000: Pass/Fail criteria for precision metal ferrule connec-
tors.
– Ribbon_: Pass/Fail criteria for single-mode and multi-mode
connectors from IEC 61300-3-35 standard.
– SM-UPC: Pass/Fail criteria for single-mode UPC connectors
from IEC 61300-3-35 standard.
– SM-APC: Pass/Fail criteria for single-mode APC connectors
from IEC 61300-3-35 standard.
– SM_PC: Pass/Fail criteria for single-mode PC connectors
from IEC 61300-3-35 standard.
– MM_: Pass/Fail criteria for multi-mode connectors from IEC
61300-3-35 standard.
– SFP_: Pass/Fail criteria for small form-factor pluggables.
Profiles contain the analysis parameters from which Pass/Fail
criteria are determined.
Tip
1.
Press the
[
A
]
key.
2.
Tap the
[
Tip
]
button.
3.
Select the tip set on the Digital Probe to connect fiber for
inspection and tap on the tip set.
More
1.
Press the
[
A
]
key.
2.
Tap the
[
More
]
button to view or change the storage location,
settings and information of the Digital Probe.