Viavi MTS 4000 Base Unit User Manual Download

Page: 75 / 254

Chapter 4

System set-up

Configuring the unit

User Manual

77000000206 Rev. 007

File Export

In the I/O Interfaces menu, select

File Export

to configure the system in

order to send traces and results by e-mail. Parameters to configure the
mail feature.
Send Mail

Choose

Ethernet

if you wish to use the sending

mail function.
If

Enable

has been selected on the Bluetooth

line, select

Bluetooth

to send files using the

Bluetooth option

Sender Mode

Auto

Manual

Auto

mode, you will not have the possibility to

reply to the mail sent.
In

Manual

mode, the reply will be sent to the

address entered in the line

From

. Use the button

to enter into an edition window

Relay Mode

Auto

Manual

If the e-mail sending is performed via a SMTP
network, select the

Manual

Relay mode and

indicate the SMTP server address in the field
Mail Relay, using the button to open the
edition window.
In

Auto

mode, the sending of e-mail is performed

automatically.

See

"Sending files by mail" page 178

for more explanation on sending

files.

Bluetooth

The Bluetooth selection appears only if the interface is installed on your
unit. It requires factory-installed hardware.

Select

Disable

to deactivate or

Enable

to activate the Bluetooth option.

Audio

If Sender Mode is set to Auto, any reply to an e-mail sent by the 4000
Platform will be lost.

NOTE

If the Bluetooth is activated (Enable), the icon

is displayed on the

upper banner of the screen.

Summary of Contents for MTS 4000 Base Unit































































































































































































































































Search results

Summary of Contents for MTS 4000 Base Unit

Reviews:

Related manuals for MTS 4000 Base Unit

Brands by name

Popular brands

Viavi MTS 4000 Base Unit, User Manual

Search results

Summary of Contents for MTS 4000 Base Unit

Reviews:

Related manuals for MTS 4000 Base Unit

Brands by name

Popular brands