Viavi MTS 4000 Base Unit User Manual Download

Page: 213 / 254

Chapter 12

Smart Access Anywhere

Using Remote screen and File Transfer applications

User Manual

77000000206 Rev. 007

191

Double-click on one directory/storage media to display the contents
(directories / sub-directories / files)

Navigation buttons

Transferring files

from PC to T-

BERD/MTS

On the T-BERD/MTS explorer, select the storage media, and if
wished the (sub-)directory into which file will be transferred.

On the PC file explorer, select the file to be transferred

Click on the button

Upload

At the bottom of the screen, a new banner displays with information
on file transfer:

Once transfer is completed, the banner disappears and the transferred
file is underlined in blue on T-BERD/MTS explorer.

Transferring files

from T-BERD/MTS-

4000 to PC

On the PC explorer, select the storage media, and if wished the
(sub-)directory into which file will be transferred.

On the file explorer of the T-BERD/MTS, select the file to be trans-
ferred.

Return to the Home directory

Select the PC drive in the list

Access to parent directory

click

Fig. 125

Information on file transfer

1: location of the uploaded file on PC

3: level of transferred data

2: location of the file on T-BERD/MTS
once transfer is completed

4: bar graph of the transfer
in progress

Only one file can be uploaded from PC to Platform at the same
time.

Summary of Contents for MTS 4000 Base Unit































































































































































































































































Search results

Summary of Contents for MTS 4000 Base Unit

Reviews:

Related manuals for MTS 4000 Base Unit

Brands by name

Popular brands

Viavi MTS 4000 Base Unit, User Manual

Search results

Summary of Contents for MTS 4000 Base Unit

Reviews:

Related manuals for MTS 4000 Base Unit

Brands by name

Popular brands