Viavi MTS 4000 Base Unit, User Manual

Page: 191 / 254

Chapter 11 File management
File menu
User Manual 77000000206 Rev. 007 169
Storage media
built into the 4000
Platform
– An internal memory
– An extended internal memory, on option
External USB
storage media
The 4000 Platform is equipped with 2 USB ports as standard. One of
these can be used to connect an external storage medium, in particular
a USB memory stick.
USB memory stick connection
Insert the USB memory stick in one of the 4000 Base Unit's USB port.
A sound is emitted to confirm the successful insertion and recogni-
tion of a USB memory stick.
Then, the icon
is displayed in the upper banner to inform the
user the USB stick is ready to be used.
Do not connect a USB memory stick while a USB printer is printing.
If the 4000 Platform does not emit a beep, disconnect and reconnect the
USB memory stick (do not perform this action too quickly - wait 5
seconds between the disconnection and reconnection).
If after several trials, no beep is emitted and no icon is visible, two prob-
lems can be considered:
– A previous USB memory stick has not been properly disconnected.
Go to
“USB memory stick disconnection” on page 170
– the USB memory stick is not detected by the 4000 Platform: use
another USB memory stick or another storage medium or transfer
data via Ethernet (see
“Accessing the internal memory or the USB
memory stick of the 4000 Platform via a PC” on page 38 ).
In case of errors, the icon is displayed:
– The stick is not formatted
– The stick has been removed without prior Eject USB key use and
some applications are still using it.
If the size of the free space is not correct, the USB memory stick must be
formatted.
NOTE
Although two USB ports are present, it is not possible to use simulta-
neously more than one external USB storage medium.
For the high capacity USB sticks of 2Go or higher, only the memory
sticks provided by Viavi are recommended.