Viavi MTS 4000 Base Unit, User Manual

Page: 129 / 254

Chapter 6 Applications
eMail Application
User Manual 77000000206 Rev. 007 107
– Select SMTP Authentication (SMTP AUTH) if you wish to add an
authentication to the mail access.
Once selected, you can choose the authentication method to be
used:
Automatic / PLAIN / LOGIN / CRAM-MD5
You can also enter a User ID and Password for authentification
when sending messages.
Select Authentication with POP3 before sending if the message must
be authenticated by a POP3 server before sending.
Click on Apply to validate the Send parameters.
6 On the Page index, click on Compose and define the parameters
for the composition of the messages.
In the Signature zone:
– Insert signature automatically : select this parameter in order to
insert a signature at the end of all the messages sent.
– Signature separator : modify, if necessary, the signature separator
(-- by default)
– Select if the signature is available in a file or with a command output.
– In the Automatically set the following addresses zone, enter the
addresses of the contact(s) to which a copy or a reply will be sent for
all messages.
Click on Apply to validate the Compose parameters.
NOTE
If those two fields are empty, the same user ID and password as the
Receive parameters will be used.
Fig. 71 Mail Account - Compose parameters