VIAVI//Public
T-BERD
®️
/MTS-2000 Modular Test Set
T-BERD
®️
/MTS-2000 Modular Test Set
QUICK CARD
2
Optical Spectrum Analyzers. The Best OSA Modules & Platforms (viavisolutions.com)
CONNECT TO FI BER UNDER TEST (FUT)
All fibers and connectors should be cleaned and inspected prior to connection, as described on page 1.
The Nano OSA is typically connected to the FUT via a Monitor Port or splitter/tap to not disrupt service.
The Nano OSA can also be directly connected to the common port or common fiber via a coupler during
turn up or maintenance:
1.
Inspect the OCC port on top of the test set.
2.
If connecting to the Common Cable, connect the Common
Cable to an optical coupler with the same connector type and
inspect the fiber end face in the coupler.
3.
If connecting to the Monitor Port or Common Port on the Mux,
inspect the Mux Port.
4.
Inspect the fiber end face of the Patch Cable and connect the
cable to the OCC port.
5.
Inspect the other fiber end face of the Patch Cable and Connect
the Launch Cable to the coupler or Mux port.
Figure 3: OCC Port Inspection
Figure 4: Connecting to Monitor Port
Figure 5: Connecting to Common Cable