About this Manual
Final
mA-6806 AXIe Vector Signal Transceiver Operation Manual
Page xv
July 2019
Safety and Compliance Information
Conventions
The following symbols and markings are used throughout documentation and on the
Chassis.
Table 1
Safety Conventions
This symbol indicates a note that includes important supplemental
information or tips related to the main text.
This symbol represents a general hazard. It may be associated with either
a DANGER, WARNING, CAUTION or ALERT message. Refer to
accompanying information and/or documentation.
This symbol indicates a toxic hazard. Item should only be handled by
Qualified Service Personnel. Dispose of item in accordance with local
regulations.
This symbol indicates an item is sensitive to Electrostatic Discharge (ESD).
An item identified as ESD sensitive should only be handled by Qualified
Service Personnel.
This symbol indicates the item meets the requirements of the applicable
European Directives.
Table 2
Safety Definitions
Term
Definition
CAUTION
Identifies conditions or activities that, if ignored, can result in
equipment or property damage, e.g., Fire.
Mise en Garde
Identifiez les conditions ou les activités qui, si ignorées, peuvent
entraîner des dommages à l’équipement ou aux biens, p. ex. un
incendie.
WARNING
Identifies conditions or activities that, if ignored, can result in personal
injury or death.
Avertiseement
Identifiez les conditions ou les activités qui, si ignorées, peuvent
entraîner des blessures personnelles voire mortelles.