Viavi CX300 ComXpert, Operation Manual, Page: 63 / 256

Chapter 2 Getting Started: Setup and Operation
Operating and Navigating the User Interface
22130634 CX300 ComXpert Operation Manual Rev. 001
2.8.2.3.1 Numeric Keypad
The Numeric Keypad allows the user to enter a value and to use the step buttons to
increment or decrement the value in the defined
Step
field.
The Numeric Keypad contains the following controls:
Figure 2-5 Numeric Keypad
Table 2-5 Numeric Keypad Controls and Settings
Control Name Description
Pin Button
When the Pin button is enabled (blue), the
Numeric Keypad remains open after the Apply
button is pressed. The Pin button also recalls the
last location of the pop-up when closing/opening.
De-selecting the Pin button will display the
pop-up open in the center like normal.
Close Button
This button closes the Numeric Keypad . Any
changes that have not been applied will be lost
when the Close button is pressed.
Clear Button
This button clears the numerical value that is or
has been entered.
Step Decrease
Pressing this button decreases the parameter by
the value in the Step field .
Step Increase
Pressing this button increases the parameter by
the value in the Step field .
Step Field
The
Step field
defines the increment value by
which a parameter is decreased or increased
when the and buttons are pressed.