manualshive.com logo in svg

Viavi CT-X, User Manual, Page: 5 / 46

Share
Download
Viavi CT-X User Manual Download Page 5

CT-X User’s Guide

22137813, Rev. 000

Feb 2020

5

Contents

About this Guide 

7

Purpose and scope .................................................................................................. 7

Assumptions .............................................................................................................. 7

Technical assistance ................................................................................................. 7

Safety and compliance information ...................................................................8

Conventions ..............................................................................................................8

Typographical conventions............................................................................8

Keyboard and menu conventions ................................................................9

Symbol conventions ........................................................................................9

Safety definitions ........................................................................................... 10

Precautions ............................................................................................................... 11

Periodic calibration ................................................................................................. 11

What ships with the CT-X? .................................................................................. 12

Preparation for use ................................................................................................ 12

Chapter 1  

Quick Tour 

13

About the CT-X ....................................................................................................... 14

Features .................................................................................................................... 14

A guided tour of your CT-X ..................................................................................15

Front view .........................................................................................................15

Rear view ...........................................................................................................15

Navigating the menus .......................................................................................... 16

Main menu ....................................................................................................... 16

Status menu .....................................................................................................17

Setup menu ..................................................................................................... 18

Signal configuration ...................................................................................... 19

Network menu ................................................................................................20

SFP info ............................................................................................................. 21

General notes .................................................................................................. 21

System menu ...................................................................................................22

Summary of Contents for CT-X















































Reviews:

No comments