Chapter 3 Installing CPRIAdvisor CAP-100 and CAE-100
30
CPRIAdvisor Installation Guide
NOTE
Automatic IP address detection via DHCP occurs only three times. If it fails to find the IP
address within three times, you need to exit by pressing
Ctrl+c
. As a follow-up measure,
check if your LAN cable is properly inserted or DHCP server operates well.
Setting date and time
You can set date and time based on your time zone after configuring the IP address. The system
clock can be set
in the format of YYYYMMDD based on your time zone using the terminal emulation
program.
NTP setting (recommended)
You can set date and time by typing the time server on your network. The date and time are
synchronized with the server.
Procedure
1
On the on-screen prompt of the terminal emulator program, type 4.
2
Tyep n when asked Date and Time Manual or NTP in the on-screen prompt.
