5.
Check that the Set Reference result is ≤0.15 dB before proceeding. Clean or replace
reference cords if necessary, and set reference again if value exceeds 0.15 dB.
Verification Test
To verify reference has been set correctly, setup the following connection.
1.
Connect FC1 to the Local TX port and SC1 to coupler 1.
2.
Connect SC5 to the Local RX port and SC6 to coupler 2.
3.
Connect FC2 to the Remote TX port and SC2 to coupler 2.
Summary of Contents for Certifier40G
Page 1: ...CERTIFIER40G Fiber Certification Testing User Manual ...
Page 2: ...Certifier Series C40G ...
Page 11: ......
