Viavi Certifier Series, User Manual, Page: 14 / 25

Cable
Select “Generic MMF” cable.
Connector
Select “Generic” connector.
Label Source
Refer to User Manual
– Certifier Copper Certification
or User Guide
– List Based
Testing for more information.
List Based Testing
List based testing allows creation of label list in the J-Report software on PC and then
bring the list to Certifier. It further allows easy selection of labels from the list to help
technician select the cables to be tested quickly. This testing method is carefully
optimized for typical test work-flow, and it significantly improves productivity.
Refer to User Manual
– Certifier Copper Certification
or User Guide
– List Based
Testing for more information.
Project Settings
Project Settings provides non-results oriented configurations before performing an
AUTOTEST.
Refer to User Manual
– Certifier Copper Certification
for more information on Project
Settings.
System Settings
Refer to User Manual
– Certifier Copper Certification
for more information on System
Settings.