Viavi CellAdvisor 5G, User Manual

Page: 315 / 359

CellAdvisor 5G User's Guide
303
You can tap to switch to BS Output Power or EIRP under the chart in the table, and it will show the automatically
calculated value.
Setting limit
1 Tap the Menu > Limit on the side bar.
2 Tap to switch the Test Limits to On or Off to enable or disable Pass/Fail indication.
The result table color for Pass is green, and the result table color for Fail is red.
3 Tap High Limit to set the upper threshold using the on-screen keyboard.
4 Tap Low Limit to set the lower threshold using the on-screen keyboard.
5 Optional . Tap the Save icon on the side bar and select the save option form the choices available for your measurement mode.
BS output power measurement with 5G TM
Conducting unwanted emissions
Occupied bandwidth
The Occupied Bandwidth measures the percentage of the transmitted power within a specified bandwidth. The percentage is
typically 99%.
Setting measure setup
Before starting the measurement, you need to set Spectrum measurements displayed on the quick access and display tab. See
"
Configuring Spectrum Measurements " for more details. The measurement settings can be saved and recalled as a file by selecting
File Type as Setup and load the file onto the instrument using the Save/Load icons on the side bar.
1 Tap the Setup ( ) icon on the side bar.
2 Tap Radio Setup then the Radio Setup pop-up window appears.
If you select the operating frequency as FR1 , select from the following:
▪
SCS 15 kHz: 5, 10, 15, 20, 25, 30, 40, 50 MHz