Viavi Apex Enterprise G3-APEX-ENT-32T User Manual Download

Page: 61 / 380

G3-GS-8P-96T

Chapter 1: Appliance installation 61

Input frequency

50/60Hz

Input voltage

100V-240V Auto Select

Operational current (amps)

6.20A

BTU

2402 BTU/hr

Operational voltage

120V

Power dissipation (watts)

765W

Relative humidity (non-condensing)

5%-85%

Temperature (operating)

50°F - 95°F / 10°C - 35°C

Temperature (storage)

-4°F - 149°F / -20°C - 65°C

If applicable, mounted weight includes any rail kits.

SFP may be any of Copper 10/100/1000, 1Gb SX/LX. SFP+ may be any of 10Gb SR/LR. QSPF+ may

be any 40Gb SR/LR/BiDi/Universal.

Parts list

Each appliance comes packed in a number of boxes. The boxes contain the

various components necessary for a successful installation.
The boxes are not numbered as listed here. The numbers merely represent how

many boxes you should expect and what is contained in each one.

♦

Box 1

●

1 Head unit with RAID drives preinstalled

●

1 Rail kit

●

2 Power supply cables

●

2 Ethernet cables

●

1 Product Activation Information envelope containing the product

license

●

1 Quick Start Guide

Before installing, ensure you received all of the parts required for your system.

G3-GS-8P-96T installation

Getting your appliance installed is the first step to greater visibility of your

network. This topic covers installing your appliance in the cabinet and connecting

it to your network.

Caution:

Do not attempt in-cabinet repairs of your appliance. The

appliance is very heavy! Always use a server lift or work with a partner

to install or remove the appliance from the cabinet to perform any

maintenance.

Take the appliance and all other components out of the packing materials.

Attach the

official rail kits (page 73)

to your server rack or cabinet.

Install the unit into your server rack or cabinet. Use a server lift if necessary.

Do not remove the RAID drives from the chassis.

Summary of Contents for Apex Enterprise G3-APEX-ENT-32T





























































































































































































































































































































































































Search results

Summary of Contents for Apex Enterprise G3-APEX-ENT-32T

Reviews:

Related manuals for Apex Enterprise G3-APEX-ENT-32T

Brands by name

Popular brands

Viavi Apex Enterprise G3-APEX-ENT-32T, User Manual

Search results

Summary of Contents for Apex Enterprise G3-APEX-ENT-32T

Reviews:

Related manuals for Apex Enterprise G3-APEX-ENT-32T

Brands by name

Popular brands