Viavi Apex Enterprise G3-APEX-ENT-32T, User Manual

Page: 337 / 380

Capture card device properties
Chapter 15: Gen3 Capture Card 337
Field Description
risk immediate damage to the capture card. Always maintain
proper case airflow and ambient temperature.
Power This icon shows a red color if there is a power problem. A power
problem could occur if the 12v power supply (PSU) rail, typically
for MOLEX and auxiliary connections, is operating out-of-range
and could indicate a dying power supply. A power problem could
also be caused by the PCIe slot providing too little or too much
wattage to the capture card relative to the PCIe specification.
This could indicate a motherboard problem or a dying PSU. A
green icon means that power to the card is normal.
Board ID The unique ID of the capture card is shown here.
System ID The system ID is shown here.
Figure 156: Explanation of lights
Advanced Settings
The Advanced Settings tab allows you to view and modify auto-negotiation
and port Tx settings for the capture card. Each port has its own settings.