VIASYS Vmax Encore, Technical Reference Manual

Page: 55 / 86

Technical Reference Manual Vmax Encore
L2707
3–1
CHAPTER 3
MAINTENANCE AND TROUBLESHOOTING
MAINTENANCE
Install all items provided in the Annual Performance Check Kit (P/N 771635):
CLEANING
1. Remove all dust and dirt from all interior and exterior surfaces of the cart, console, or table.
2. Remove all dust and dirt from all surfaces of the computer, keyboard, and monitor.
COMPUTER
1. Ensure any adapter boards are secure.
2. Check for and remove any virus from the computer memory and hard-drive using “Anti-
virus” software.
3. Note on the APC Record Form and FSR, the revision of Vmax Vision software being used.
4. Perform a Standard “SCANDISK” on the C drive, from the C:> of the computer.
5. Perform a Defrag on the C drive, from the C:> of the computer.
PRINTER
•
Clean the interior and exterior surfaces.
•
Perform a printer “self test” and ensure proper printing.
BATTERY/ALARM TEST
With the main power of the instrument turned OFF, turn ON the fan control switch that is located at
the front of the Pneumatics/Fan Assembly. The alarm should activate within five seconds. Apply
power to the system, the alarm should be silenced. Replace battery if necessary.
C
AUTION
!
If a virus is discovered, all software disks that may have come into
contact with the computer must be “cleaned” or discarded. Make sure
the customer is informed of the situation.