ViaSat VMBR-1520, Installation, Operation And Maintenance Manual, Page: 48 / 88

VMBR-1520 Mobile Broadband Router Installation, Operation, and Maintenance Guide
Operating Procedures
1075152 Rev. 001
4-14
4. Operating Procedures
4.1 Introduction
This section contains additional information for operating the VMBR-
1520 through the serial console port, including rebooting the modem,
checking and adjusting Forward Link and Return Link parameters, and
verifying ACU and Network Management System (NMS) status.
4.2 Rebooting the Modem
The general menu is shown below. Enter
r
and then enter
y
and
y
again to confirm the reboot. The Telnet session will be terminated, and
the modem will perform a software reboot.
Main Menu
0 - General Parameters
1 - Satellite Parameters
2 - ACU Parameters
3 - Forward Link Parameters
4 - Return Link Parameters
5 - Network Parameters
6 - SCPS Parameters
7 – Miscellaneous Parameters
8 – Calibration Parameters
9 – Overhead Parameters
A - ACU Installation Setting
R – Reboot
S – System Status
U – Upgrade Terminal Software
V – Version Information
X - Exit Program
Please enter menu item: r
r r
r
Do you want to reboot the terminal (y/n)? y
y y
y
Are you SURE you want to reboot the terminal (y/n)? y y y y