
39
ENGLISH
❖
Setting up your remote control for your TV
You can set up your remote control to operate the basic features of your TV . This enables
you to control your TV and your box with just one remote control .
Code search
To program your remote control to operate your television, you must first use the remote
control to find the four-digit code that corresponds to your television brand . During this
code search you will run through every available code in the remote control’s library .
To search for your television code:
1 .
Make sure that your television is switched on .
2 .
Press the TV button on your remote control and release it .
3 .
Press and hold down OK and
S
, until the red LED under the TV button blinks
twice .
4 .
Use the number buttons to enter
9 9 1
. The red LED under the TV button
blinks twice .
5 .
Aim the remote control at your television and press
S
.
6 .
Aim the remote control at your television and press CH + repeatedly, until
your television turns off (each time you press CH + the remote control sends a
POWER (TV off) signal using the next TV code contained in the remote control’s
library) .
You may have to press CH + many times (up to 150 times) . The code search can
take up to 15 minutes . If you skip a code, you can search through the previous
code(s) by pressing CH - .
Remember to keep pointing the remote control at your television during the
code search .
7 .
As soon as the television switches off, press OK to store this code . The red LED
under the TV button blinks twice .
8 .
Once it is set up, you can switch the remote control to operate your TV by first
pressing the TV button . To switch back to operating your box, press the VIASAT
button .
Code blink out
Once you have found the correct code, you can use your remote control to perform a
‘code blink out’ to determine what this code is .
1 .
Press the TV button on your remote control and release it .
2 .
Press and hold down OK and
S
, until the red LED under the TV button blinks
twice .
3 .
Use the number buttons to enter
9 9 0
. The red LED under the TV button
blinks twice .
4 . Press
1 and count the LED blinks .
5 . Press
2 and count the LED blinks .
6 . Press
3 and count the LED blinks .
Settings
Summary of Contents for ViasatHD Pace 3000
Page 1: ......
Page 49: ...48 BrukeViasatHD mottakeren ...
Page 97: ...48 Using yourViasatHD box ...
Page 98: ...501 8137300 ...