Chapter 3 - Operation
Figure 3.2.
LCD Controls And Indicators
3.3.2 Data Entry
Pressing some softkeys (such as POSN or RATE) results in a request for data
entry. This request is displayed at the lower, center area of the LCD. To enter
data, press the appropriate keys on the numeric keypad, and then press ENT
to enter the value. To correct data before entering, press CLR to clear and key
in new data. Pressing ESC before pressing ENT exits the data entry request
without entering the keyed digits.
NOTE
When a request for data entry is displayed ("ENTER ANGLE:"
for example), all mode control operations are disabled until
data is entered or the ESC key is pressed.
3862 Autotrack Controller
3-5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
