VIPRO VP7710 User’s Manual
32
32
32
32
First/Second/Third Boot Device
First/Second/Third Boot Device
First/Second/Third Boot Device
First/Second/Third Boot Device
Set the boot device sequence as BIOS attempts to load the disk
operating system.
Setting
Setting
Setting
Setting
Description
Description
Description
Description
LS120
Boot from LS-120 drive
Hard Disk
Boot from the HDD
CD-ROM
Boot from CD-ROM
ZIP100
Boot from ATAPI ZIP drive
USB-FDD
Boot from USB floppy drive
USB-ZIP
Boot from USB ZIP drive
USB-CDROM
Boot from USB CDROM
Legacy LAN
Boot from network drive
VIA Networking
Boot from network drive
Disabled
Disable the boot device sequence
Boot Other Device
Boot Other Device
Boot Other Device
Boot Other Device
Enables the system to boot from alternate devices if the system fails to
boot from the “First/Second/Third Boot Device” list.
Setting
Setting
Setting
Setting
Description
Description
Description
Description
Enabled
Enable alternate boot device
Disabled
No alternate boot device allowed
Boot Up NumLock Status
Boot Up NumLock Status
Boot Up NumLock Status
Boot Up NumLock Status
Set the NumLock status when the system is powered on.
Setting
Setting
Setting
Setting
Description
Description
Description
Description
On
Forces keypad to behave as 10-key
Off
Forces keypad to behave as arrow keys
Typematic Rate Setting
Typematic Rate Setting
Typematic Rate Setting
Typematic Rate Setting
Enables “Typematic Rate” and “Typematic Delay” functions.
Settings: [Enabled, Disabled]
Typematic Rate (Chars/Sec)
Typematic Rate (Chars/Sec)
Typematic Rate (Chars/Sec)
Typematic Rate (Chars/Sec)
This item sets the rate (characters/second) at which the system retrieves
a signal from a depressed key.
Settings: [6, 8, 10, 12, 15, 20, 24, 30]
Typematic Delay (Msec)
Typematic Delay (Msec)
Typematic Delay (Msec)
Typematic Delay (Msec)
This item sets the delay between when the key was first pressed and
when the system begins to repeat the signal from the depressed key.
Settings: [250, 500, 750, 1000]