Page 33 of 85
viasis 3003 user manual
via
traffic
controlling
gmbh
6.3.4 Menu Speed display options
The menu
Speed display options
is shown if you choose
4
in the
Settings
menu:
Speed display options:
1. Decimal places: off
2. Minimal speed displayed: 5 km/h
3. Maximal speed displayed: 199 km/h
4. Threshold blinking LED: 200 km/h
5. Threshold Led mixed color: 200 km/h
6. Threshold LED color change: 200 km/h
7. Back
Your choice 1...7?
The parameter values shown above are the default values ex factory.
For viasis LED displays with only one LED color the options
Threshold LED mixed color
and
Threshold LED color change
do not exist. The
Threshold LED mixed color
is only
shown for viasis with two appropriate LED colors. The options given in menu “Speed display
options”, with exception of the Decimal places, need to be defined for each activated parame-
ter set.
6.3.4.1 Decimal places
For applications where low vehicle speeds shall be measured exactly, e. g. for drive in weigh-
bridges, the display of a decimal digit until 19,9 km/h (or mph) can be activated by entering
1
in the
Speed display options
menu and further activating the decimal:
Decimal places
1. off
2. on
Your choice 1...2?
If vehicle speeds above or equal 20 km/h are measured the speed values are displayed on the
numeric LED display as whole numbers again. If the speed decimal is activated the speed data
output in the
Online measurement
(chapter 6.6) mode, is also given with a decimal digit.
The setting for decimal places is a general setting equal for all parameter sets.
6.3.4.2 Minimal - and maximal speed displayed
The „
Minimal speed displayed
“ is the lowest measured speed value published on the numeric
LED speed display
In the “Settings” menu you are prompted after the selection
4
:
Minimal speed displayed = _
End the numbers input with <
return
>. The new value is shown in the menu immediately.
The values for minimum speed can be set in the range between 5 and 199 km/h. Only values
lower or equal the adjusted maximum speed will be accepted by the system.
