Page 22 of 85
viasis 3003 user manual
via
traffic
controlling
gmbh
6.2.5 Bluetooth modem connection
Check whether you computer is equipped with a Bluetooth radio interface ready for operation.
If not you may obtain e. g. a USB Bluetooth dongle and install the device driver and operating
software delivered by the manufacturer.
Depending on the operating system of your computer and the installed Bluetooth interface,
either internal or external modem, the way to establish a Bluetooth data connection will vary.
Therefore for internal Bluetooth modems please check the online help system of your comput-
er and for external Bluetooth modems solution check the installation and operation manual of
the manufacturer, delivered with the modem.
If standard (generic) Windows Bluetooth interface drivers are used for the Bluetooth modem
operation, the initial configuration of the Bluetooth connection is shown for Windows 7 below:
-
Open
Devices and Printers
by the
Windows
Start
menu or the
Control
Panel
. In the
Devices and Printers
window, see also illustration 21, click
to
Add a device
in the menu bar.
-
The viasis Bluetooth module is ready
for operation ex factory and reported
e. g. with the device name
VIASIS_15SC9991
, where 15SC9991
is the 8 character long viasis serial
number.
-
During the connection setup you are
further asked for a pairing code or pin
number. Enter here the default in the
viasis set four digit pin number
1234
.
If the Bluetooth connection is established suc-
cessfully the later started
viagraph
software
can find the viasis, otherwise not.
Illustration 34: Reported found new device(s)
Illustration 35: Bluetooth device added
Illustration 36: Pairing code, pin number