VIA 693 Socket 370 AT Mainboard
AWARD BIOS SETUP
4-18
4.9
INTEGRATED PERIPHERALS
ROM PCI / ISA BIOS (2A6LGP8H)
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
On-Chip IDE Channel0
:
Enabled
On-Chip IDE Channel1
: Enabled
IDE Prefetch Mode
: Enabled
Primary Master PIO
: Auto
Primary Slave PIO
: Auto
Secondary Master UDMA
: Auto
Secondary Slave UDMA
: Auto
Primary Master UDMA
: Auto
Primary Slave UDMA
: Auto
Secondary Master PIO
: Auto
Secondary Slave PIO
: Auto
Init Display First
: PCI Slot
KBC input clock
: 8Mhz
Onboard FDC Controller
: Enabled
Onboard Serial Port 1
: 3F8 / IRQ4
ESC : Quit
:
Select Item
Onboard Serial Port 2
: 2F8 / IRQ3
F1 : Help
PU/PD/+/- : Modify
UR2 Mode
: Standard
F5 : Old Values
(Shift)F2 : Color
Onboard Parallel Port
: 378/IRQ7
F7 : Load Setup Defaults
Parallel Port Mode
: SPP
Fig. 5-7 INTEGRATED PERIPHERALS setup screen.
On-Chip IDE Chanel 0/1:
(Default setting: “Enabled” )
The integrated peripheral controller contains an IDE interface with support for two
IDE channels. Select Enabled to activate each channel separately
IDE Prefetch Mode:
(Default setting: “Enabled” )
This allows you to select the IDE interface prefetch mode. Basically, Enable is
suggested because it will increase the HDD data performance.
Primary/Secondary Master/Slave PIO:
(Default setting: “Auto” )
The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4)
for each of the four IDE devices that the onboard IDE interface supports. Modes 0
through 4 provide successively increased performance. In Auto mode, the system
automatically determines the best mode for each device.
