VIA 693 Socket 370 AT Mainboard
HARDWARE SETUP
3-3
2.
Minimum one DIMM module must be installed on the mainboard.
3.
When FSB clock is 66MHz. please use 3.3V PC-66 or PC-100 DIMM
module.
4.
When FSB clock is 100MHz. please use 3.3V PC-100 DIMM module.
5.
You can use single side or double side DIMM module on this mainboard.
6.
Please install the DIMM module starting from DIMM1 first.
Note:
If your DIMM module does not have the parity bit,
please don't enable the Parity/ECC check feature in
the BIOS setup.
3.3
CONNECTORS
The connectors on mainboard will be used to connect the accessories or peripheral
devices (such as power, mouse, printer,...etc.). Following is the connectors with its
description and pin assignment which is designed on the mainboard.
(A) BAT1:
Battery Socket
(Use the 3 Volts Lithium battery : CR2032)
CPU
BAT1: Battery Socket