BIOS Setup
3-25
Date (of Month)
The field specifies the date for
RTC Alarm Resume
. Settings: 0~31.
Resume Time (hh:mm:ss)
The field specifies the time for
RTC Alarm Resume. F
ormat is <hour>
<minute><second>.
IRQs Activity Monitoring
Press Enter to enter the sub-menu and the following screen appears:
Primary INTR
Selecting
ON
will cause the system to wake up from power saving modes
if activity is detected from any enabled IRQ channels.
IRQ3~IRQ15
Enables or disables the monitoring of the specified IRQ line. If set to
Enabled
, the activity of the specified IRQ line will prevent the system
from entering power saving modes or awaken it from power saving modes.
Note:
IRQ (Interrupt Request) lines are system resources allocated to
I/O devices. When an I/O device needs to gain attention of the operat-
ing system, it signals this by causing an IRQ to occur. After receiving
the signal, when the operating system is ready, the system will inter-
rupt itself and perform the service required by the I/O devic
e.
