VIA Mobile360 FSS AWS IoT Core Quick Start Guide
1
1. Introduction
This document provides instrucitons on how to setup an AWS portal to connect with a VIA Mobile360 Forklift
Safety System(FSS) device.
1.1 Directing Data from a VIA Mobile360 FSS Device
to AWS IoT Core
To direct data from VIA Mobile360 FSS devices to your cloud implementation, the AWS IoT Core Web Service
must be set up and configured to receive data coming from VIA Mobile360 FSS devices.
For a VIA Mobile360 Forklift Safety System(FSS) device to connect to your AWS backend, follow the steps listed
below to set up your AWS services
• Follow the steps listed in Section 2.3 to register an AWS IoT Thing and to acquire AWS IoT certificate
files for the VIA Mobile360 FSS devices.
− Acquire the certificate (*-certificate.pem) and the private key (*-private.pem.key) files associated
with the IoT thing you created, as displayed in
step 7
of Section 2.3..
− Acquire the Device Shadow URL displayed in
step 9
of Section 2.3.
1.2 VIA Mobile360 FSS Device
The datasheet and installation guide of the VIA Mobile360 FSS device could be found on the VIA Mobile 360
forklift Safety System product page.
https://www.viatech.com/en/products/systems/mobile360/mobile360-forklift-safety-system/
•
•
