VIA Technologies EPIA-M910, User Manual, Page: 27 / 107

VIA EPIA-M910 User Manual
16
2.2.2. LVDS Panel Connectors
The VIA EPIA-M910 has two LVDS panel connectors: LVDS1 and LVDS2. LVDS1 connector is controlled
by VIA VX900 chipset while the LVDS2 connector is controlled by VT1636 LVDS transmitter. The pinouts
of the LVDS panel connectors are shown below.
Figure 15: LVDS panel connectors diagram
Pin Signal Pin Signal
M1 GND
2 PVDD1 1 NC
4 PVDD1 3 NC
6 GND 5 GND
8 GND 7 NC
10 -LD1C0 9 NC
12 +LD1C0 11 GND
14 GND 13 NC
16 -LD1C1 15 NC
18 +LD1C1 17 GND
20 GND 19 NC
22 -LD1C2 21 NC
24 + LD1C2 23 GND
26 GND 25 NC
28 -LCLK1 27 NC
30 + LCLK1 29 NC
32 GND 31 GND
34 -LD1C3 33 NC
36 + LD1C3 35 NC
38 DVP1_SPCLK 37 NC
40 DVP1_SPD 39 NC
Table 12: LVDS1 panel connector pinouts