VIA EPIA-M930 User Manual
9
2.1.3
Gigabit Ethernet Ports
The 2 integrated 8-pin Gigabit Ethernet ports is using an 8 Position 8 Contact (8P8C) receptacle connector
commonly known as RJ-45. The pinouts of the Gigabit Ethernet port are shown below.
Figure 08: Gigabit Ethernet port diagram
Pin
Signal
1
Signal pair 1+
2 Signal pair 1-
3
Signal pair 2+
4 Signal pair 3+
5
Signal pair 3-
6 Signal pair 2-
7 Signal pair 4+
8 Signal pair 4-
Table 05: Gigabit Ethernet port pinouts
Each Gigabit Ethernet port has two individual LED indicators located on the front side to show its Active/Link
status and Speed status.
Link LED
(Left LED on RJ-45 port)
Active LED
(Right LED on RJ-45 port)
Link Off
LED is off
LED is off
Speed_10Mbit
Yellow Flash
LED is off
Speed_100Mbit
Yellow Flash
The Green LED is on
Speed_1000Mbit
Yellow Flash
The Orange LED is on
Table 06: Gigabit Ethernet port LED color definition
