Important safety information
Please observe the following safety precautions when using your DExx-vd_isl board.
Follow the instructions for your DE10 Nano –
Ensure you are using the correct power supply for
your DE10 Nano and following all relevant safety guidelines as supplied with your DE10 Nano kit.
Turn off the power before connecting/disconnecting the board
– To prevent damage to the DExx
board or your DE10 Nano board, always turn off and disconnect the power before connecting or
disconnecting the device.
Turn off the power before connecting/disconnecting devices
– To prevent damage to the DExx
board always turn off and disconnect the power to both your device and your DE10 Nano before
connecting or disconnecting any devices to the SCART port.
Do not expose to moisture
– Droplets of moisture may contact the PCB and cause a short circuit.
Never submerge the unit in water.
Please supervise children
– This product is not a toy and is not designed for use by children.
Please supervise children if they use the DExx-vd_isl.
Beware of using the bob deinterlace mode on sources that display static graphics or text for a
long period of time –
This deinterlacing mode
produces a constant flickering effect. This can cause
image retention/burn-in to occur faster than normal. We recommend using the scaler mode and
motion adaptive deinterlacing where possible, see page 20 for more details.
