Vexar C36EMW-RB Owners & Installation Manual Download Page 1

For more information, visit www.desatech.com

SAVE THIS BOOK

This  book  is  valuable.  In  addition  to  instructing  you 
on how to install and maintain your appliance, it also 
contains information that will enable you to obtain re-
placement parts or accessory items when needed. Keep 
it with your other important papers.

This fireplace is approved for use as a wood burning 
fireplace or for use with a vented gas log approved to 

ANS Z21.60, Z21.84 or RGA 2-72 standards or for use 
with a vent-free gas log heater approved to ANS Z21.11.2 
standard. A vent-free log can only be installed in an af-
termarket (completion of sale, not for purpose of resale 
from  the  manufacturer),  permanently  located,  manu-
factured (mobile) home, where not prohibited by local 
codes. Approved hood must be installed when using a 
vent-free gas log heater (see 

Accessories

, page 18).

This firebox meets the construction and safety stan

-

dards of H.U.D. for application in mobile homes when 
installed according to these instructions.

INSTALLER: Leave this manual with the appliance.
CONSUMER: Retain this manual for future reference.

36" CirCulating louvered Firebox

oWner’S inStallation Manual

C36eMW-rb with brushed 

brass Finish bi-fold doors

C36eMW-rbb with black 

Finish bi-fold doors

C36eMW-rPlb with Platinum 

Finish bi-fold doors

Includes Manual 

Control Fan System 

and Combustion 

Air Kit

O-TL REPORT # 114-F-20-4

Summary of Contents for C36EMW-RB





















Reviews: