manualshive.com logo in svg

Vetter Smartfork, Operating Instructions Manual

Share
Download
Vetter Smartfork Operating Instructions Manual Download Page 8

1.2.1 

VETTER SmartFork

®

 Camera, camera function

Fig. 2: VETTER SmartFork

®

 Camera

When a raised load obstructs the view, the area in front of the fork tips is visible on the
monitor. Raising the load on the VETTER Smart

Fork

®

 is monitored thanks to the direct

transmission to the monitor. The fork tip can be equipped with additional LED lighting to

improve illumination of the image area.

1.2.2 

VETTER SmartFork

®

 SideCam, camera function

Fig. 3: VETTER SmartFork

®

 SideCam

The positioning of the VETTER Smart

Fork

®

 Side

Cam

 application on the inside of the fork

arms near the heel allows the position of both fork arms to be monitored on the monitor.

This facilitates simple and safe insertion into the load.

 VETTER SmartFork

®

 overview

Overview of applications > VETTER SmartFork® SideCam, camera function

V1.08/2019

SmartFork

®

- The intelligent SensorFork

8

Summary of Contents for Smartfork































































Reviews:

No comments

Brands by name

Popular brands

Load more brands