manualshive.com logo in svg

Vetter Smartfork, Operating Instructions Manual

Share
Download
Vetter Smartfork Operating Instructions Manual Download Page 56

6.3 

After completion of maintenance activity

Personnel:

n

Driver of industrial trucks

Protective equipment:

n

Protective work clothing

n

Industrial helmet

n

Protective gloves

n

Safety shoes

Carry out the following steps upon completion of maintenance work or troubleshooting

and before returning the assistance system and industrial truck to operation:

1.

Tighten all previously loosened screw connections.

2.

Reinstall all previously removed protective equipment and covers.

3.

Check the cable routing:

To prevent damage, cables must be out of the range of movement for moving parts.

4.

Reset the lift truck fuse.

5.

Remove all tools, materials and other equipment from the work area.

6.

Clean the work area (remove any leaked materials such as e.g. liquids, processing

materials or similar).

 Maintenance of the VETTER SmartFork

®

After completion of maintenance activity

V1.08/2019

SmartFork

®

- The intelligent SensorFork

56

Summary of Contents for Smartfork































































Reviews:

No comments

Brands by name

Popular brands

Load more brands