manualshive.com logo in svg

Vetter Smartfork, Operating Instructions Manual

Share
Download
Vetter Smartfork Operating Instructions Manual Download Page 53

6.2.6 

Replacing the VETTER SmartFork

®

Personnel:

n

Service specialist

n

Driver of industrial trucks

Protective equipment:

n

Industrial helmet

n

Protective work clothing

n

Protective gloves

n

Safety shoes

1.

Prepare the lifting device for large loads, e.g. indoor crane and lifting straps. The

work is to be carried out by 2 people.

2.

Align the VETTER Smart

Fork

®

 parallel to the ground.

3.

Raise the VETTER Smart

Fork

®

 up from the ground by raising the fork carriage until

it is no longer in contact with the ground. Secure the fork carriage against unin-

tended lowering.

4.

Disconnect the plug connections between the VETTER Smart

Fork

®

 applications

and the corresponding cables of the lift mast connector.

5.

Remove moveable cables from the immediate assembly area and protect them

against damage.

6.

Open the VETTER Smart

Fork

®

 locking device. To do so, move the lever of the

locking device vertically upwards.

Fig. 30: Moving the fork arms down

7.

WARNING!
Risk of crushing the hands when moving!

Grasp the VETTER Smart

Fork

®

 at the head and fork blade and move it down from

the fork carriage.

 Maintenance of the VETTER SmartFork

®

Maintenance activities > Replacing the VETTER SmartFork®

V1.08/2019

SmartFork

®

- The intelligent SensorFork

53

Summary of Contents for Smartfork































































Reviews:

No comments

Brands by name

Popular brands

Load more brands